The deal’s still moving, but the contract came back with redlines. Some of the edits seem harmless. Others might significantly shift risk. And you’re not sure which changes are worth accepting to get the deal done and which warrant a slowdown in the conversation.
You don’t have to push back on every clause. But you do need to know which terms significantly affect your deal and where you can make trade-offs. The best contract negotiation strategies are built around that balance.
This article walks you through contract negotiation principles and contract negotiation tactics that help get results.
What is contract negotiation?
Contract negotiation is the process of agreeing on legally binding terms before you and the other party sign a contract. There’s an implied back-and-forth, in which the parties decide what each side will do and what they’ll get for it, as well as what happens if the relationship doesn’t go as planned.
In business, contract negotiations shape the final deal. The draft may start with commercial terms already discussed with the other party, but the written agreement (the contract) ultimately governs. Clauses that look routine can shift financial risk or create vague obligations that lead to confusion.
The contract negotiation process is where you iron out these kinds of wrinkles before they cause problems. You set expectations and get a clear view of the business relationship to prevent disputes down the line.
How to prepare for contract negotiation
When you think about a negotiation, you probably picture a conversation. But really, most contract negotiations begin well before anyone utters a word. It’s all in the preparation. This is where you get a clear view of what matters and where you have room to make demands and concessions.
Research the deal and the counterparty
Negotiating contracts takes significant research. If you skip this part, you may concede ground you didn’t have to give up.
Start by researching the deal itself. In particular, make sure you understand what’s “standard” for the type of contract you’re negotiating, as well as what’s centrally important to this type of deal. That might be:
- Checking liability caps against industry standards in a SaaS deal.
- Examining payment timing in a services agreement.
- Focusing on ownership terms in a deal heavy on intellectual property (IP).
The research phase gets much more tactical when you start looking at the counterparty. What you learn about them will tell you where there may be flexibility. For example, larger enterprises tend to have formal approval processes and less flexibility on contract terms. Meanwhile, smaller vendors can move more quickly but may be more likely to ask for nonstandard contract compromises.
There’s a timing component to your counterparty research, too. Where are you in the quarter? If the counterparty needs to close before EOQ, they might act with more urgency—and perhaps make more compromises on terms—than a counterparty with no deadline.
You’ll also want to pay attention to any existing obligations you find. Prior contracts and investor requirements, for instance, can limit what the other side can accept. Don’t forget to check any regulatory obligations that might affect the negotiation.
Build your negotiation plan
What you learn in the research phase informs the contract negotiation plan you build. This plan doesn’t have to be long, but it needs to make your position clear before negotiating starts.
Make sure your plan covers the following:
- Objectives: Lay these out by contract term, and classify them as must-haves or nice-to-haves. Name the points you’re unwilling to accept.
- Best alternative to a negotiated agreement (BATNA): If the deal falls through, what’s your best alternative? The BATNA is the option you can take instead of signing. It’s one of the most important concepts in negotiation. Knowing your alternative protects you from counterparty pressure.
- Walk-away point: Define what would make this deal no longer worth doing. Stick to it.
- Trade-offs: Put in writing what you can move on and what you expect in return.
- Internal ownership: Who from your team owns business decisions? What about legal review? State it clearly so there’s no confusion later.
- Starting positions: Create a term sheet or playbook that outlines where you stand on the terms at the start of negotiations.
Negotiation strategies during talks
You researched and planned. Now you’re ready to try these contract negotiation tips:
Opening and anchoring
Being first is a tried-and-true contract negotiation strategy. If you can draft the contract first, you’ve set the terms for the whole conversation. Now, the counterparty has to start by responding to your paper. The fact that the first version will change means little here. It’s about gaining control. You get control over structure and framing, as well as default positions. And remember that this goes both ways: If the counterparty drafts first, don’t assume their paper is neutral. As yours would, their draft likely reflects their preferred risk allocation, not a balanced middle ground.
If you’re responding to the counterparty’s first draft, focus on the terms that matter most to you. Don’t waste leverage on tiny wording tweaks. Push back where the business risk is heaviest. When it helps move the conversation forward, don’t be shy about explaining your reasoning.
Whether you’ve gained early control or not, anchoring works best when the position is defensible. Numbers without rationale can look arbitrary. Tie them back to deal size or business risk, and they look much more rational.
Be careful in this phase not to stumble into a common trap: opening with your fallback position. Don’t give that away until you’re ready to use it. Once it’s out there, you’ll struggle to walk it back to something that’s better for you.
Bargaining and closing
After the opening salvo, you’re in active negotiations. This is when it’s best to listen more than you speak. In particular, listen to the counterparty’s objections. You can learn more about what the other side needs. For example, a hard “no” may be an immovable policy issue. But a softer objection might signal room to trade on a term or two.
Concessions are normal during this phase, but be cautious. Think of this as concession trading, not concession giving. If you accept, for instance, a broader indemnity, you may ask for a stronger liability cap. A faster payment may warrant a cleaner termination right. And so on.
As you trade concessions, you’ll encounter problems that need solving. There’s almost always more than one way to solve a problem, so be flexible about the form of the concession or term. Be firm on what changes hands: the risk you're absorbing, the money you're committing, the rights you're giving up.
As a final deal starts to take shape, it’s tempting to speed up. But this is actually a good place to pump the brakes. The final terms are often the last ones addressed because they’re the trickiest or most important. Speeding up can cause you to make concessions you otherwise wouldn’t have. It’s OK to take your time to get every term right.
Key terms to protect in business contracts
You can have razor-sharp contract negotiation skills but still stumble if you’re focused on the wrong terms. These are the key terms to protect during business contract negotiation:
Core business and risk terms
Core contract terms determine who gets paid and what gets delivered, as well as who carries the risk and how they do so:
- Payment: Payment timing should be clear. The contract should explain what happens if payment is late or tied to missed project milestones.
- Deliverables: The agreement needs to define what the customer receives. Importantly, it also needs to define acceptance criteria, which determineswhen work is complete enough to warrant approval and/or payment.
- Warranties: What is the provider promising about the deliverable? How long does that promise last? Warranties answer those questions.
- Liability limits: Liability caps can limit recovery if something goes wrong. Exclusions can narrow that recovery even more.
- Indemnification: Indemnity language determines when one party has to cover certain claims by third parties. Scope and mutuality are important here.
- IP ownership: Who owns the work product and data should be clear in the contract.
Legal infrastructure and dispute protections
During a friendly negotiation, dispute protections and processes may seem less essential. But these terms are critical in any contract, especially should a dispute arise. Here are the terms to protect:
- Termination rights: These lay out when either side can end the agreement and when and how they must give notice of termination.
- Dispute resolution: The contract should spell out where disputes will be handled and what process applies. Detail matters here; arbitration and litigation follow different paths.
- Force majeure: A force majeure event is an extraordinary event that prevents contract performance. These terms are important; watch for over-broad wording about what counts as such an event.
- Attorneys’ fees: The economics of enforcing the contract depend in part on who pays the legal fees and under what circumstances.
- Written-change requirements: How can either side make changes to the contract? The contract should clearly answer that question.
- Compliance terms: Verbal assurances about industry-specific protections aren’t enough. They need to appear in the written contract.
Let Crosby take the first pass on redlines
Many growing companies don’t have deep experience with contract negotiations. Contracts come in fast, and deals need to keep moving. You’re often left with a choice: Rush the review or slow things down.
Crosby helps you maintain the pace. Crosby’s custom AI agents analyze contracts against market standards and your playbook, and barred lawyers oversee the redlines. You set the priorities; Crosby executes quickly, with fixed, per-document pricing.
Talk to Crosby before your next contract negotiation.
FAQs
What’s the difference between contract review and contract negotiation?
Contract review identifies the risks. Contract negotiation is the process of changing the terms to address those risks.
When should I bring in a lawyer for contract negotiation?
Consult an attorney when the contract creates meaningful legal, financial, or operational risk. Exercise extra caution with contracts involving IP or high-value deals.
How long should a contract negotiation take?
That depends on the deal. A low-risk contract might take a few days, while complex commercial agreements could easily take weeks, especially if internal approval processes are involved. Delays usually result from slow redline cycles or unclear decision-making.
What’s the most common mistake founders make in contract negotiation?
Treating the contract as a formality once the business terms are agreed upon informally. The signed agreement is what controls the relationship. Period.

